We have a wide variety of large and extra-large lathe which were designed based on our deep experience in turning turbine rotor shafts, generator rotor shafts, mill rolls and large shafts for ship building industry. A very good reputation has been enjoyed for its rigidity and high accuracy of their turning capability.
CNC Lathe / Model: L-26N
A large and heavy duty lathe equipped with two carriages for rough turning and finish grinding of plate mill backup rolls and work rolls.
CNC Turbine Rotor Lathe / Model: L-36N
CNC Lathe / Model: L-35HN
| Model | L-11N | L-16N | L-18N | L-20N | L-24N | |
| Swing over bed | mm | 1,100 | 1.600 | 1,800 | 2,000 | 2,400 |
| Center distance | mm | 4,000～20,000 | 4,000～20,000 | 4,000～20,000 | 4,000～20,000 | 4,000～20,000 |
| Max. work weight | kg | 10,000 | 20,000 | 30,000 | 40,000 | 50,000 |
| Spindle Motor | AC/kw | ～37/55 | ～60/75 | ～100 | ～100 | ～200 |
| Model | L-26N | L-28N | L-32N | L-35HN | L-36N | L-40N | |
| Swing over bed | mm | 2,600 | 2,800 | 3,200 | 3,500 | 3,600 | 4,000 |
| Center distance | mm | 6,000～20,000 | 6,000～20,000 | 6,000～20,000 | 6,000～25,000 | 6,000～20,000 | 6,000～20,000 |
| Max. work weight | kg | 60,000 | 100,000 | 300,000 | 300,000 | 300,000 | 400,000 |
| Spindle Motor | AC/kw | ～200 | ～200 | ～330 | ～500 | ～330 | ～330 |
A special purpose large lathe with two sets of headstock and tool post was designed exclusively to turn turbine discs. After finish turning one side of the disc using one headstock, the other headstock approaches, chucks and moves to its home position to turn the other side of the disc, where time consuming rechucking job is drastically reduced.
CNC Turbine Rotor Lathe /
Model: L-35N 3,500 x 10,000
CNC Turbine Disc Lathe / Model: L-28N 2,800 x 6,000
CNC Lathe / Model: L-20BN
A special purpose large lathe with a long square boring bar and a tool holder for fine finishing of cylinder liner bore.
Precision finishing of Cylinder Liner Bore
